It would be great if there was a "mitt" that would hold a Clorox Wipe. Dusting mitts are very handy for cleaning surfaces since you just glide your hand over the surface. A "Clorox Cleaning Mitt" could be very useful. The mitt would have two surfaces. The one surface would be coated with silicon. The silicon would not absorb the moisture from the Clorox Wipe, and the silicon would be heat resist if the mitt was being used on a warm surface, say in the kitchen. The opposite surface of the mitt would have a scouring material similar to non-abrasive Scotch-Brite Pads. That way, if the dirty area needs to be scrubbed to loosen the dirt, you just flip the mitt and scrub before you continue cleaning. In order to hold the wipe on the mitt, grippers could be inbedded in the mitt similar to the grippers on a Swiffer Sweeper. The mitt would make it easier to clean contoured surfaces such as sinks, sink pedestals, the exterior of toilets, and cabinets among other uses.